Bacharach PCA3 Spezifikationen PDF herunterladen (Seite 87)

PCA



3 Manual

0024-9473 Rev 4 87

7.3. Emptying the Water Trap Chamber

The water trap chamber should be emptied after every test, or when the water

condensate approaches the tip of the riser tube.

1. Remove water trap chamber (also see page 53).

2. Pour out liquid condensate and then reassemble trap.

7.4. Replacing the Filter Element

Replace the filter element when it becomes visibly dirty or becomes saturated

with water.

7.4.1. Material Required

•

Filter Element (P/N 0007-1644)

•

Small Flat Blade Screwdriver

7.4.2. Procedure

1. Remove water trap chamber (also see page 53).

2. Pry apart filter chamber using a small flat-blade screwdriver. Remove

and discard old filter.

3. Install new filter and reassemble filter chamber, making sure that

surfaces “A” and “B” contact each other.

4. Reassemble trap.

Figure 7-6. Disassembling the Water Trap/Filter Assembly

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 103 104

Keine Kommentare

Bacharach PCA3 Spezifikationen Seite 87