Bacharach PCA3 Spezifikationen PDF herunterladen (Seite 61)

PCA



3 Manual

0024-9473 Rev 4 61

3. Use the ▲▼ buttons to highlight PRINT AVERAGE, press the ENT

button to display a directory of stored test data.

NOTE:

Combustion records that can be used for the

Average calculation will be time and date coded. Pressure

and Temperature records will also be shown but can not be

selected for the Average calculations.

4. Use the ▲▼ buttons to highlight any three consecutive combustion

records, then press ENT to display the calculated average for all data

stored in the records.

NOTE: If the highlighted records contain a Temperature or

Pressure record, the calculation will not be performed.

5. Press the print key (F1) to print a copy of all three records and their

average, or ESC to return to the Print Average Screen.

Figure 5-22. Print Average

5.14. Downloading Stored Data to a Computer

The combustion test data that was stored in either the analyzer’s Memory

Directory or Logging Directory (see Memory Functions section on page 58), can

be downloaded to a computer using the Fyrite

User Software and USB cable

that are supplied with the analyzer.

The downloaded data is stored on the computer’s hard drive – or removable

media of the operator’s choosing – as a comma-separated-value ASCII text file

with a CSV extension. This type of file can be opened by most spreadsheet

programs for analysis.

For information on the installation of the Fyrite

User Software, refer to the

installation document (provided in .PDF format) on the software disk. The Fyrite

User Software installation manual may also be downloaded from the PCA

page of the Bacharach website (

www.MyBacharach.com). Refer to manual

0024-9465. Minimum computer requirements for installation and use of the

Fyrite

User Software are shown below.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 103 104

Keine Kommentare

Bacharach PCA3 Spezifikationen Seite 61