Bacharach PCA3 Spezifikationen PDF herunterladen (Seite 60)

PCA



3 Manual

60 0024-9473 Rev 4

5.13.4. Clearing Memory

When all memory locations used to store individual combustion test records have

been filled, the next combustion test record saved will not overwrite the oldest.

When all logging memory locations in the logging directory are full, they must be

manually cleared in order to store new data. At no time will the logging process

overwrite older data. Logging will stop when available memory is filled. Each

memory bank can be individually cleared, or all memory locations in both banks

can be cleared simultaneously. Do the following to clear memory.

1. Display the MAIN MENU by pressing the MENU (F2) button. If

necessary, press ESC until MENU appears above F2.

2. Use the ▲▼ buttons to highlight MEMORY, and then press ENT to

display the MEMORY MENU.

Figure 5-21. Clearing Memory

3. Use the ▲▼ buttons to highlight one of the following:

•

CLEAR MEMORY DATA clears only the individual saved

combustion test records.

•

CLEAR LOGGING DATA clears only the combustion test records

that were saved during the logging process.

•

CLEAR ALL MEMORY clears all memory locations in both memory

banks.

4. Press ENT to display the CLEAR MEMORY, LOGGING, or ALL DATA

conformation screen. Highlight YES to confirm that memory is to be

cleared, and then press ENT to actually clear memory as evidenced by

the display of the “WAIT Erasing memory” screen.

5.13.5. Print Average

The PCA

3 will automatically calculate, display, and print the average of three

consecutively saved combustion records. Calculate, display or print the average

data as follows.

1. Display the MAIN MENU by pressing the MENU (F2) button. If

necessary, press ESC until MENU appears above F2.

2. Use the ▲▼ buttons to highlight MEMORY, and then press ENT to

display the MEMORY MENU.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 103 104

Keine Kommentare

Bacharach PCA3 Spezifikationen Seite 60